DJI Zenmuse H30 Series

Flagship all weather payload.

See Further

The H30 series features an upgraded RGB camera, allowing you to see objects clearer, even when they are further away.

Enhanced Night Vision

See clearer images even when the sun isn't out. The H30 series utilizes advanced hardware and software to deliver clearer night images and videos.

Improved Infrared

See the unseen with the H30T. With an upgraded thermal camera, you can capture up to 1280×1024 thermal images, letting you see more, clearer.

Rugged Design

The H30 series features a quality exterior casing that allows for operation even in poor weather conditions.

Up to 34× Optical Zoom and 400× Digital Zoom

The Zenmuse H30 Series showcases a high-resolution 40MP zoom camera, enabling up to 34× optical zoom and an impressive 400× digital zoom. When compared to the prior model, it excels in observing subjects from far distances and capturing intricate details.

Stable Images

Utilizing DJI's advanced image stabilization algorithm, the Zenmuse H30 Series minimizes shake in telephoto footage, ensuring stable and crisp imagery for precise power line inspections.

Rangefinder

The laser range finder features a measurement range 2.5 times larger than the previous generation, precisely capturing position info of subjects within a 3m to 3000m range, including linear distance, altitude, and GPS coordinates.

Improved Night Vision

Both the zoom and wide-angle cameras of the Zenmuse H30 Series can switch to Night Scene mode in low-light conditions, enhancing live view and recording quality. This ensures operational efficiency and accuracy at night, enabling continuous operation from day to night.

Black and White Night Vision and NIR Illumination Supported

In Night Scene mode, the Zenmuse H30 Series zoom camera supports IR Light for infrared enhancement and NIR illumination. It switches the live feed to a grayscale image by removing the IR filter, thereby strengthening the contrast between light and dark areas, making it easier to locate subjects. When the NIR auxiliary light is enabled, the zoom camera can benefit from additional NIR illumination, which is especially helpful for night safety observation and search-and-rescue operations.

1280×1024 Infrared Resolution

Zenmuse H30T supports three infrared gain modes: High Gain mode for more precise temperature measurement, Low Gain mode for a wider temperature measurement range, and the new High-Res mode, which is especially useful for observing objects, people, or animals with small temperature differences, making it highly practical for security, emergency, and search-and-rescue operations.

Visual and IR Cameras Simultaneous Zoom

The Zenmuse H30T's zoom camera and infrared thermal camera support Link Zoom, allowing operators to scale the visible light and thermal images in tandem and maintain the same viewpoint. This side-by-side comparison of image details helps locate the subject faster, increasing efficiency while saving effort.

Temperature Measurement Range from -20° to 1600° C

With the installation of an infrared density filter, [9] the infrared thermal camera can measure temperatures up to 1600° C (2912° F), 3× the previous generation. This is particularly useful for firefighting and high-temperature operations, as it allows for more effective judgment of temperature changes and rapid locating of hotspots, increasing rescue efficiency.

Smart Capture

In Smart Capture mode, the Zenmuse H30 Series cameras analyze ambient light brightness and dynamic range, applying intelligent image algorithms for natural light transitions and rich details in various lighting conditions.

Countless use Cases

Public safety, grid management, oil field and beyond - The H30 series is ready to conquer any mission.

Ready for a Quote?

Fill out the form below, and we will get in touch with you as soon as possible.

Contact form

Required fields are marked with *.

Additional Information

Specs

General

Product Name

Zenmuse H30 Series

Dimensions

170×145×165 mm (L×W×H)

Weight

920±5 g

Power

H30: 26 W
H30T: 28 W

Ingress Protection Rating

IP54

Under controlled laboratory conditions, it can achieve an IP54 protection rating by IEC60529 standards. The IP rating is not permanently effective and may decrease due to product wear and tear.

Supported Aircraft

Matrice 300 RTK (requires DJI RC Plus)
Matrice 350 RTK

Environment

Operating Temperature

-20° to 50° C (-4° to 122° F)

Storage Temperature

-20° to 60° C (-4° to 140° F)

Gimbal

Stabilization System

3-axis (tilt, roll, pan)

Angular Vibration Range

Hover: ±0.002°
Flight: ±0.004°

Mounting

Detachable DJI SKYPORT

Mechanical Range

Tilt: -132.5° to +73°
Roll: ±60°
Pan: ±328°
(Structural limit, not controllable range)

Controllable Range

Tilt: -120° to +60°
Pan: ±320°

Operation Mode

Follow/Free/Re-center

Zoom Camera

Sensor

1/1.8-inch CMOS, Effective Pixels: 40 MP

Lens

Actual Focal Length: 7.1-172 mm (Equivalent focal length: 33.4-809.3 mm)
Aperture: f/1.6-f/5.2
DFOV: 66.7°-2.9°

Focus Mode

MF, AFC, AFS

Exposure Mode

Manual, Auto

Exposure Compensation

±3.0 (1/3 increments)

Metering Mode

Spot Metering, Average Metering

AE Lock

Supported

Electronic Shutter Speed

1/8000-2 s

ISO Range

Single Shot: 100-25600
Night Scene: 100-819200

Video Resolution

Single Shot: 3840×2160@30fps, 1920×1080@30fps
Night Scene: 1920×1080@25fps, 1920×1080@15fps, 1920×1080@5fps

Video Format

MP4

Video Subtitles

Supported

Video Codec and Bit Rate Strategy

H.264, H.265
CBR, VBR

Max Photo Size

7328×5496, 3664×2748

Photo Format

JPG

Wide-Angle Camera

Sensor

1/1.3-inch CMOS, Effective Pixels: 48 MP

Lens

Actual Focal Length: 6.72 mm (Equivalent focal length: 24 mm)
Aperture: f/1.7
DFOV: 82.1°

Focus Mode

MF, AFC, AFS

Exposure Mode

Manual, Auto

Exposure Compensation

±3.0 (1/3 increments)

Metering Mode

Spot Metering, Average Metering

AE Lock

Supported

Electronic Shutter Speed

1/8000-2 s

ISO Range

Single Shot: 100-25600
Night Scene: 100-409600

Video Resolution

Single Shot: 3840×2160@30fps, 1920×1080@30fps
Night Scene: 1920×1080@25fps, 1920×1080@15fps, 1920×1080@5fps

Video Format

MP4

Video Subtitles

Supported

Video Codec and Bit Rate Strategy

H.264, H.265
CBR, VBR

Max Photo Size

8064×6048, 4032×3024

Photo Format

JPG

Infrared Thermal Camera (H30T)

Thermal Imager

Uncooled VOx Microbolometer

Lens

Focal Length: 24 mm (equivalent focal length: 52 mm)
Aperture: f/0.95
DFOV: 45.2°

Digital Zoom Equivalent

32×

Video Resolution

1280×1024@30fps

Video Format

MP4

Video Subtitles

Supported

Video Codec and Bit Rate Strategy

H264, H265
CBR, VBR

Photo Resolution

1280×1024

Photo Format

R-JPEG

Pixel Pitch

12 μm

Spectral Band

8-14 μm

Noise Equivalent Temperature Difference (NETD)

≤ 50 mk@f/1.0

Temperature Measurement Method

Spot Measurement, Area Measurement, Center Point Temperature Measurement

Temperature Measurement Range

High Gain: -20° to 150° C (-4° to 302° F), -20° to 450° C (-4° to 842° F) (With Infrared Density Filter)
Low Gain: 0° to 600° C (32° to 1112° F), 0° to 1600° C (32° to 2912° F) (With Infrared Density Filter)

Temperature Alert

Supported

Sun Burn Protection

Supported

FFC

Auto, Manual

Palette

White Hot, Black Hot, Tint, Iron Red, Rainbow 1, Rainbow 2, Medical, Arctic, Fulgurite, Hot Iron

Laser Range Finder

Wavelength

905 nm

Measurement Range

3-3000 m
Range for Common Objects: Grasslands 2000 m, woodlands 1900 m, road surfaces 1700 m‌*

The measurement range may vary based on the material and shape of the tested object as well as the impact of gimbal angle, environmental light, and weather conditions such as rain or fog. If a laser pulse hits multiple targets, its energy is dispersed, which may reduce the measurable distance.
* Test conditions: Flat surface subject, subject size exceeding the laser beam diameter, atmospheric visibility of 23 km (shorter range in clear conditions compared with overcast), laser impinges at an oblique angle (with an angle of incidence of approx. 0.2 radians).

Measurement Accuracy

≤ 500 m: ±(0.2 m+measurement distance×0.15%)
‌> 500 m: ±1.0 m

Laser Spot Size

@100 m: approx. 50×450 mm
@1000 m: approx. 450×4500 mm

Safety Regulation Level

Class 1

Accessible Emission Limit (AEL)

260 nJ

Reference Aperture

18 mm

Max Laser Pulse Emission Power Within 5 Nanoseconds

52 W

NIR Auxiliary Light

Wavelength

850 nm

FOV

4.6±0.6° (Round)

Safety Regulation Level

Class 1

Illumination Range

@100 m: Approx. 8m diameter circle

Special Features

Hybrid Optical Zoom

34×

Max Zoom

400×

Link Zoom

Supported

Click to Aim

Supported

High-Res Grid Photo

Supported

Night Scene

Supported

Timestamp

Supported

Smart Capture

Supported

Video Pre-Recording

Supported

UHR Infrared Image

Supported

Data Storage

Supported microSD Cards

U3/Class10/V30 or above is required, or use a memory card from the recommended list.

Supported File System

exFAT

Recommended microSD Cards

Lexar 1066x V30 A2 64GB/128GB/256GB/512GB microSDXC
Kingston CANVAS GO! Plus V30 A2 64GB/128GB/256GB/512GB microSDXC

Zenmuse H30 supports the Security Code function. Go to Data and Privacy in DJI Pilot 2 and set the code to encrypt the microSD card installed on the camera. Download the DJI Decrypt Tool from the DJI official website to decrypt the microSD card on a Windows computer and access the card content.

Post-Processing Software

Mapping Software

DJI Terra, DJI FlightHub 2

Infrared Analysis Software

DJI Thermal Analysis Tool 3

* Before using a Zenmuse H30-Series payload for the first time, activate it using the DJI Pilot 2 app.

** All data on this page was measured using a production model Zenmuse H30-Series payload in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.

*** All videos and images on this page were shot using the Zenmuse H30 Series by professionals in strict compliance with local laws and regulations and have undergone varying degrees of editing in post-production. All videos and images are for reference only. Actual results may vary. Always observe local laws and regulations and ensure the aircraft has obtained relevant certifications and airspace authorizations before flying.

**** All images, videos, and screen display content regarding the product itself on this page are for reference only. Actual product effects (including but not limited to appearance, color, and size) and screen display contents (including but not limited to backgrounds, UI, and illustrations) may vary.

1. An Infrared Density Filter is required to be purchased additionally to enable temperature measurements up to 1600° C (2912° F).

2. Comparing the max zoom ratios of the Zenmuse H30 Series and the H20 Series. Data measured in a DJI laboratory.

3. Comparing the longest measurement distance of the laser range finders of the Zenmuse H30 Series and the H20 Series. Data measured in a DJI laboratory.

4. Data measured in a DJI laboratory. The measurement range may vary based on the material and shape of the tested object as well as the impact of gimbal angle, environmental light, and weather conditions such as rain or fog. If a laser pulse hits multiple targets, its energy is dispersed, which may reduce the measurable distance.

5. IR Light and NIR Illumination are supported only when using the zoom camera. NIR Illumination will only activate after takeoff. If the NIR auxiliary light is enabled first, IR Light will also start simultaneously.

6. Comparing the infrared thermal camera resolutions of the Zenmuse H30 Series and the H20 Series. Data measured in a DJI laboratory.

7. The UHR Infrared Image feature should be enabled in advance. The function turns off when the Night Scene mode is enabled.

8. Temperature measurement is not supported when the High-Res mode is used on the infrared thermal camera.

9. Sold separately.

10. Comparing the highest measurable temperatures of the infrared thermal cameras of the Zenmuse H30 Series and H20 Series. Data measured in a DJI laboratory.

11. Night Scene mode and ‌Electronic Dehazing cannot be used at the same time.

12. Under controlled laboratory conditions, it can achieve an IP54 protection rating by IEC60529 standards. The IP rating is not permanently effective and may decrease due to product wear and tear.